MONARCH Parts
0102030405
Elevator PG Frequency converter divider card Monarch MCTC-PG-E MCTC-PG-A2 Elevator pcb
As a key component in the elevator system, the PG card is used in conjunction with the motor to achieve precise position control of the motor. It converts the motor's rotation angle into a digital signal and feeds it back to the inverter controller, thereby ensuring the accuracy and stability of the motor's operation. In addition, the PG card also has a fault diagnosis function, which helps maintenance personnel quickly locate and solve problems.
As an elevator accessory, MCTC-PG-E is usually used in conjunction with the encoder in the elevator control system to achieve precise control and safety protection of elevator operation. It has the following features:
Encoder adaptability: MCTC-PG-E is compatible with a variety of encoders, such as sine-cosine 1387 encoders, etc., and monitors the elevator speed and position by receiving the encoder's signal.
Frequency division function: This accessory has a frequency division function, which can convert the high-frequency signal output by the encoder into the low-frequency signal required by the elevator control system to ensure the stable operation of the system.
Interface and power supply: MCTC-PG-E usually has a DB15 interface for connecting to the encoder and providing a 5V/200mA power supply to the encoder.
Safety: As part of the elevator control system, MCTC-PG-E follows strict safety standards in design and manufacturing to ensure safe and reliable elevator operation.
Here is the parameter of MCTC-PG-E:
| Maximum response frequency | 50kHz (applicable to sine-cosine 1387 encoder, etc.) |
| Interface type | DB15 |
| Encoder power supply | 5V/200mA |
| Signal type | Receive encoder A+/-, B+/-, C+/-, D+/-, Z+/- and other signals |
| Rated load | Depends on the type of elevator and design requirements, generally can reach 2000kg or higher |
| Operation control mode | Supports multiple control modes such as collective selection control |
| Drive mode | Mostly DC drive |
| Power | Usually 24Vpp |
| Installation method | Generally installed in the electric cabinet in a binding style. |
| Weight | About 100G. |
| Adaptation system | Mainly adapted to Monarch NICE3000+ and other systems |
As an important component in the elevator control system, MCTC-PG-E plays an important role in the safe and efficient operation of the elevator. It should be given full attention and concern during the selection, installation, use and maintenance.
Guiding the discourse：Send your enquiry with our high quality Elevator PG Frequency converter divider card Monarch MCTC-PG-E MCTC-PG-A2 Elevator pcb.
description2