Elevator outdoor call car display board Monarch MCTC-HCB-G1 MCTC-HCB-G2 Elevator pcb

The following is the characterstics of Monarch display board MCTC-HCB-G2:

   Size: 157mm*65mm*22mm

   6 8*8 red dot matrix large area display

   Two display modes: Chinese and English

   Two display modes: horizontal and vertical; three-digit floor numbers can be displayed simultaneously

   Up and down button input, elevator lock, fire input

   Button setting floor, support 56 floors calling

   "Inspection" or "INS" is displayed under inspection; "Full load" or "FULL LOAD" is displayed under full load; "Overload" or "OVERLOAD" is displayed under overload;

   G1 displays red font, G2 displays orange font, and G4 displays blue font.

Here are some things to note in MCTC-HCB series display board:

Set floor address setting-S1: Press S1 once to display the floor address; each time it is pressed, the floor address increases by 1; Address setting range: 0-56, cyclic display and setting; After the setting is correct, the address number flashes three times and is automatically saved, and then switches to normal floor display status.

Program version number view-TEST: Power on, short-circuit pins 1 and 2 of TEST, the up and down button inputs are valid, and the program version number is displayed.

Display mode selection-J6/J7: J6 sets the display in Chinese and English, 1 and 2 pins are shorted to English, 2 and 3 pins are shorted to Chinese, the default display is Chinese. J10 sets the display in horizontal and vertical directions, 1 and 2 pins are shorted to vertical direction, 2 and 3 pins are shorted to horizontal direction, the default display is horizontal direction.

Between MCTC-HCB-G1 and MCTC-HCB-G2, the appearance, the function and the size are the same, but the lighting color is different: MCTC-HCB-G1 is red, and MCTC-HCB-G2 is orange. The installation and maintenance of elevator car display panels are important links to ensure the normal operation of elevators and improve passenger experience. The following are some precautions for installing the elevator car display panels:

   Determine the installation location: According to the design and use requirements of the elevator car, reasonably determine the installation location of the display panel. Generally speaking, the display panel should be installed in a location that is easy for passengers to observe and does not hinder the operation of the elevator.

   Choose a suitable installation method: According to the type of display panel and the structure of the car, choose a suitable installation method. Common installation methods include wall-mounted, embedded, etc. During the installation process, ensure that the display panel is firmly fixed to avoid loosening or damage due to vibration or impact.

   Connect the line: During the installation process, the power cord and signal line of the display panel should be correctly connected. Ensure that the line connection is firm and there is no exposed part to prevent safety hazards such as electric shock or short circuit.

   Debugging and testing: After the installation is completed, the display panel should be debugged and tested to ensure that it can normally display key data such as floor information and elevator operation status. At the same time, check whether the brightness and clarity of the display panel meet the requirements, and whether there are flickering, black screen and other fault phenomena.

Guiding the discourse：Send your enquiry with our high quality Elevator outdoor call car display board Monarch MCTC-HCB-G1 MCTC-HCB-G2 Elevator pcb .