Elevator encoder Mitsubishi Z65AC-018 X65AC-19 Elevator Parts

‌Troubleshooting methods for Mitsubishi Z65AC-018 encoder:‌

1.‌Check the alarm code‌:

Observe the alarm code of the Mitsubishi servo motor, such as AL.16, to determine whether it is an encoder failure.

2.‌Check the connection problem‌:

‌Connector connection‌: Check whether the encoder connector CN2 is well connected and ensure that the cable is correctly connected.

‌Cable status‌: Check whether the encoder cable is damaged, such as open circuit or short circuit, and repair or replace it in time.

3.‌Power supply check‌:

Ensure that the encoder power supply voltage is stable and not lower than the specified value, such as 4.75V, to avoid failure caused by insufficient power supply or fluctuation.

4.‌Environmental factors‌:

Consider the impact of environmental factors such as high temperature, humidity, and dust on the encoder, keep the encoder clean, and avoid contamination.

5.‌Replacement or repair‌:

If the internal components of the encoder are damaged, it is usually necessary to replace the entire encoder. Repair is not recommended because the repair process is complicated and the cost is close to that of a new encoder.

Guided speech：Send your enquiry with our high quality Elevator encoder Mitsubishi Z65AC-018 X65AC-19 Elevator Parts.